Tiny MDM & Device Provisioning Guide

Tiny MDM & Device Provisioning Guide

Phase 1: Tiny MDM Portal Setup

1. Create User: Go to Tiny MDM and create an Anonymous User.
2. Select Policy: Select the Policy you wish to use.
3. Assign Group: Assign the user to the group they should be associated with.
4. Generate QR: Click on Show QR Code.

Phase 2: Initial Device Setup

• Factory Reset: Start by performing a Factory Reset on the device.
• Trigger QR Scanner: At the 'Hi There' page, tap 6 times in the same place to launch the QR Code Config Scanner.
• Scan: Scan the setup QR code for the user.
• Connect: Connect to Wi-Fi. (After scanning the QR code, you will be prompted to join Wi-Fi).
• Provisioning: The device will connect to Wi-Fi and Tiny MDM to start provisioning.

Phase 3: Completing Setup

Follow the on-screen prompts on the device:

• Organization: 'This device belongs to your organization' -> Click Next.
• Loading: Device will do some loading of things.
• Work Device: 'Let's set up your work device' -> Click Accept & Continue (054).
• Privacy: 'This {Device Name} isn't private' -> Click Next.
• Tiny MDM: Click Begin.
• User Data: Personal and sensitive user data -> Click I Agree.
• Policy: Privacy and Data Security Policy -> Click I Agree.

Troubleshooting: "Not Enough Licenses" Error

1. Purchase or get more licenses.
2. At the link, this device to the end user screen.
3. Scan User QR Code again.

• Finalizing: Device will now load Tiny MDM and Profile.
• Optimization: 'For a better experience...' -> Click Turn On.
• Confirmation: 'Congratulations!' -> Click Start using the App.
• Updates: Checking for Updates.
• Google Services: Click More 3 times, then click Accept once.
• Desktop: Should get taken to the TruAge desktop. Wait for the TruAge App to come up on desktop.

Phase 4: MScan Configuration

MScan Configuration:

• Profile Default: Clipboard Output - Enable

Settings:

• Enable MScan